FSPG Cable Patch

FSPG Batt is a coated stone wool board used to reinstate the fire resistance performance of flexible & rigid wall and rigid floor constructions where apertures are penetrated by single or multiple services. The FSPG Batt is tested with a variety of services including multi composite pipes, metallic pipes, plastic pipes, all with or without insulation, cable trays and cables, as well as smoke extract and fire resistant ducts. The FSPG range of reactive products has been tested for use with the FSPG Batt. FSPG Batts are supplied coated in both single and double side versions in 50mm and 60mm thickness.

Can be used in flexible walls, rigid walls and floors.
Can be used in service openings 25mm x 25mm and 50mm x 50mm.
Can be used in conduits, Cables.
Causes no known effects to plastic pipes, plastic cables, sheathing or metallic components.
Contributes to Green Building.
Non-setting compound.
Highly flexible and water resistant.
Halogen free, resists fungi and vermin.
Maintains a fire and smoke barrier around small cables and conduits in flexible wall systems.
High tack adhesion, pliable and mouldable with excellent self bonding properties.

EN 1366-3
EN 13501-2
EN 10140

Request Technical Data Sheets

For good adhesion the surfaces of the building elements shall be free of any dust or grease and may need to be primed. On good, clean virgin concrete & masonry, no priming required. Do not apply to damp surfaces.
Ensure that the aperture and services in question are tested with FSPG Cable Patch and the site conditions are within the application specification.
FSPG Cable Patch are fitted tightly and firmly around that service.
Remove the lining paper from the back of the FSPG Cable Patch.
Ensure FSPG Cable Patch are tightly and firmly pressed against the substrate to create airtight seal.
The FSPG Cable Patch must be installed both sides of the service.