FSPG Putty Pad

FSPG Putty Pads are a pre-cut ablative pads designed for easy application around single and double electrical sockets where fire resistance is required or acoustic isolation and air permeability is a requirement.

Can be used in flexible walls, rigid walls and floors.
Can be used in large service openings 250mm x 150mm.
Can be used in cmetallic Pipes, Cables, Cable Bunches, Cable Trays and Cable Ladders.
Causes no known effects to plastic pipes, plastic cables, sheathing or metallic components.
Contributes to Green Building.
Non-setting compound.
Highly flexible and water resistant.
Halogen free, resists fungi and vermin.
Maintains a fire and smoke barrier around sockets in flexible wall systems.
High tack adhesion, pliable and mouldable with excellent self bonding properties.
Preformed shape to fit most common socket boxes.

EN 1366-3
EN 13501-2
EN 10140
Certifire CF515

Request Technical Data Sheets

For good adhesion the surfaces of the building elements shall be free of any dust or grease and may need to be primed. On good, clean virgin concrete & masonry, no priming required. Do not apply to damp surfaces.
Ensure that the aperture and services in question are tested with FSPG Putty Pads and the site conditions are within the application specification.
FSPG Putty Pads fit either internally or externally on the back of electrical boxes.
Remove the lining paper from the pad.
When using internally fold the pad to the shape of the box then press down firmly into the box working into the back and corners ensuring that FSPG Putty Pads are firmly pressed into place. Press the edges of the pad together to form a continuous seal inside the box. Ensure the edges are brought firmly together to ensure complete coverage.
When using externally, fold the pad around the back and sides of the socket over lapping onto the substrate and by pressing firmly to ensure that the FSPG Putty Pads are in place. Press the edges of the pad together to form a continuous seal around the box. Ensure the edges are brought firmly together to ensure complete coverage.
Ensure FSPG Putty Pads are tightly moulded around electrical wiring passing into the socket or from out of the socket if external application.
The FSPG Putty Pads must be installed to ensure complete airtight seal.