FSPG Putty

FSPG Putty is a non setting silicone designed to remain flexible allowing for thermal and mechanical movement of services around complete and irregular shapes through wall and floor where fire resistance must be maintained in the event of a fire.

Fire resistance tested in flexible walls, rigid walls and floors.
Tested in large service openings 250mm x 150mm.
Tested with Metallic Pipes, Cables, Cable Bunches, Cable Trays and Cable Ladders.
Causes no known effects to plastic pipes, plastic cables, sheathing or metallic components.
Contributes to Green Building.
Non-setting compound.
Highly flexible and water resistant.
Halogen free, resists fungi and vermin.
Maintains a fire and smoke barrier around sockets in flexible wall systems.
High tack adhesion, pliable and mouldable with excellent self bonding properties.

EN 1366-3
EN 10140
EN 13141-1
Certifire CF515

Request Technical Data Sheets

For good adhesion the surfaces of the building elements shall be free of any dust or grease and may need to be primed. On good, clean virgin concrete & masonry, no priming required. Do not apply to damp surfaces.
Ensure that the aperture and services in question are tested with FSPG Putty and the site conditions are within the application specification.
FSPG Putty fit either internally or externally on the back of electrical boxes.
When using internally mould the pad to the shape of the box then press down firmly into the box working into the back and corners ensuring that FSPG Putty is firmly pressed into place. Press the edges of the pad together to form a continuous seal inide the box. Ensure the edges are brought firmly together to ensure complete coverage.
When using externally, mould the pad around the back and sides of the socket overlapping onto the substrate and by pressing firmly to ensure that the FSPG Putty are in place. Press the edges of the pad together to form a continuous seal around the box. Ensure the edges are brought firmly together to ensure complete coverage.
Ensure FSPG Putty is installed minimum 2mm thickness.
Ensure FSPG Putty is tightly moulded around electrical wiring passing into the socket or from out of the socket if external application.
The FSPG Putty must be installed to ensure complete airtight seal.