FSPG Modified Coating

FSPG Modified Coating is a highly flexible water based, acrylic coating used in linear gaps where voids are present in floor and wall constructions as well as service penetrations to reinstate the fire resistance performance. The FSPG Modified Coating system offers excellent movement and acoustic capabilities. FSPG Modified Coating can offer up to 50% movement. FSPG Modified Coating can be poured, trowelled or sprayed into the aperture between the separating elements to a specified depth utilising stone wool backing material.

Tested with Metallic Pipes, Cables, Cable Bunches, Cable Trays and Cable Ladders.
Causes no known effects to plastic pipes, plastic cables, sheathing or metallic components.
Joint movement capability of +/- 50% -10 to +95^oC.
Dynamic movement testing 500 cycles per 30 minutes.
Highly flexible and water resistant.
Halogen free, resists fungi and vermin.
Can be spray, brush, pour or trowel applied.
Ideal for slab edge applications and head of wall and movement installations or where movement is expected in service penetrations.

EN 1366-3, EN 1366-4
EN 13501-2, EN 13501-1
EN 1027, EN 1026 and EN 10140
ASTM D2369-10, LEED 2009-EQ041 SCAQMD
1121-CPR-JA5010, ETA 13/1057
UL-EU-00642, Certifire CF5094

Request Technical Data Sheets

For good adhesion the surfaces of the building elements shall be free of any dust or grease and may need to be primed. On good, clean virgin concrete & masonry, no priming required, though refer to substrate compatibility requirements.
Ensure that the aperture and services in question are tested with FSPG Modified Coating and the site conditions are within the application specification.
Upon installation make sure that you install the minimum 80kg/m3 Stone Wool with a minimum 20% compression between substrates and or around services, ensuring a tight compression fit.
Fit around all services effectively, brush or trowel FSPG Modified Coating over the stone wool ensuring all joints and junctions are fully covered to the minimum required FSPG Modified Coating thickness.
Ensure FSPG Modified Coating is overlapped onto substrates or services by minimum 20mm when coating.
Ensure FSPG Modified Coating is applied to a minimum:

DFT (Dry Film Thickness) of 1mm (2.5mm Wet Film Thickness).

Stone Wool minimum 80kg/m³may be pre coated off site, applying some FSPG Modified Coating to aid during installation. Ensure the correct thickness of FSPG Modified Coating is applied after site installation.