FSPG Pipe Collars

FSPG Pipe Collars are designed and tested to seal service penetration apertures containing plastic and metallic pipes both with and without insulation. FSPG Pipe Collar has been developed to provide a high volume expansion and pressure seal in the event of a fire. The FSPG Pipe Collars can be used on pipes to a maximum diameter of 250mm for internal and external applications. The ultra-thin profile of FSPG Pipe Collars shells, a depth of 30mm or 40mm allows for the installation into the tightest of locations.

Can be used in flexible walls, rigid floors and with FSPG Batt.
FSPG Pipe Collar is supplied up to 250mm.
Can be used with Plastic Pipes – PVC, HDPE, PP, PE, ABS, PVC-C and diameter. SAN + PVC.
Can be used to close off various types of insulation around metallic pipes.
Causes no known effects to plastic pipes.
Ease of fixing to suit location 40mm maximum collar depth.
Ease of fixing only 3 fixing points required.

EN 1366-3
EN 13501-1, EN 13501-2
Etag 026 Type X
1121-CPR-JA5080, ETA 15/0489 and UAE Certificate of Compliance
UL-EU-00942 and Certifire CF5367

Request Technical Data Sheets

For good adhesion the surfaces of the building elements shall be free of any dust or grease and may need to be primed. On good, clean virgin concrete & masonry, no priming required.
Ensure that the aperture and services in question are tested with FSPG Pipe Collar and the site conditions are within the application specification. A maximum 10mm annular space needs to be present around the services. Which is filled to a minimum 5mm depth of FSPG Fire & Acoustic Acrylic prior to the installation of the FSPG Pipe Collar.
Ensure you are using the correct collar size for the pipe penetration.
Place the FSPG Pipe Collar around pipe and hold in place using the slide clip to slip through the loop and fix the FSPG Pipe Collar tightly by bending the slide fully back.
Slide FSPG Pipe Collar into place to ensure a snug fit to the surrounding building element.
Ensure fixings are as per:

3 No. 60mm x 6mm Expanding Anchors for Rigid Floors
3 No. Size 70 Wood Screws for Rigid Walls
3 No. 65 mm Spider Fixings for Flexible Walls
3 No. 35mm Tap in Fixings for Rigid Wall and Floors
3 No. 80mm Pig tails for FSPG Batt installation